|
Here is the line of male snaps installed along the port swimstep riser. They will attach the port curtain to the riser. There is an identical line of snaps on the starboard riser. These are screwed in and sealed with 5200. |
 |
A line of Lift Rings along the aft edge of the swimstep will secure the bottom of the Port and Starboard Curtain. These are the drilled and sealed sockets the rings will install into. |
 |
This shows 1 Lift Ring socket. It was drilled with 2 sizes of forstener bits and milled out with a Dremel 1/8" milling bit to provide clearance for the Lift Ring hinge. |
 |
The Lift Ring cavities are sealed with 5200 before the rings are installed. |
 |
Here are all the Lift Rings installed in the swimstep. The extra rings on the starboard side attach the roll-up doorway and mount the edges of the starboard curtain next to the doorway. |