Verifying you have all the hardware The self-install kit from Qwest should contain 6 color-coded plastic bags as well as the router itself and an install CD.

Power Cord Open the black bag and plug the power cord into the black port on the back of the Actiontec.

Power Light At this point, the Power LED on the unit should be green.

Phone Cable Plug the black phone cable into the DSL port on the back of the Actiontec (it's a black port as well) and plug the other end into the phone jack.

Internet Light The Internet LED should now be solid green.

Ethernet (Yellow) Cable Open the yellow bag and plug the yellow cable into one of the yellow ports on the back of the Actiontec. Plug the other end of the yellow cable into the network card (or ethernet port) on your computer.

Ethernet Light One of the four Ethernet Network LEDs should now be green.

Phone Filters Open the clear bag and remove the phone filters. Filters need to be installed on any device that shares a line with the DSL connection except the actual line that is used by the Actiontec.

Configuring the Actiontec Using a Web Browser (Internet Explorer, Netscape, Opera, etc.) open the address http://192.168.0.1

Main Menu Click on Setup / Configuration option to begin the basic configuration. Click on the Button. Verify that your Internet and one Ethernet light is solid and click on the Next button.

Broadband Connection When asked what connection method you use to access the internet, select PPPoA. Click on the Next button.

	seanet.com	premier1.net	ncia.com
Fully qualified username	username@seanet.com	username@premier1.net	username@seanet.com

Broadband Connection - PPP Enter your fully qualified Username in the User Name field. Enter your password in the Password field. Leave the Static IP address blank. Click on Next. Click on the button. YOU'RE DONE!