Connections Tab Click once on Seanet (Default) Then click on Settings

	seanet.com	premier1.net	ncia.com
Fully qualified username	username@seanet.com	username@premier1.net	username@seanet.com

Settings Button Use your fully qualified username. XP encrypts your password so it might look longer than usual. You can retype in your password if you like. Domain should remain blank Click on Advanced

Advanced Button These options are user preference Click OK when done Click on Properties

General Tab Check the Phone number Put all 10 digits in the Phone number field Uncheck Use dialing rules Click on Configure

Configure Button Lower the Maximum speed to 57600. If you are using a hardware modem leave the check boxes marked in Hardware features. If you are using a software modem The modem name will usually say "Soft" "Win" or "HSF" in it) then uncheck all the Hardware features. Uncheck Show terminal window. Enable modem speaker is user preference. Click on OK

Options Tab These are user preference. Click on X.25.

X.25 Button Select (none) for Network. All other fields should be blank. Click on OK

Security tab Select Typical (recommended settings) Select Allow unsecure password. All other options should remain unchecked.

Networking Tab Select PPP; Windows 95/98/NT4/2000, Internet Check Internet Protocol (TCP/IP) Click on Settings

Settings Button Check Enable LCP extensions Check Enable software compression Uncheck Negotiate multi-link for single link connections Click on OK

Properties Button Click on Properties Select Obtain an IP address automatically Select Use the following DNS server addresses Preferred DNS Server is 199.181.164.1 Alternate DNS Server is 199.181.164.2 Click on Advanced

Advanced General tab Check User default gateway on remote network Check Use IP header compression

DNS Tab Verify that 199.181.164.1 and 199.181.164.2 are in the DNS server addresses field Select Append these DNS suffixes (in order) Click on Add and type in seanet.com then click on OK Uncheck Register this connection's addresses in DNS

WINS Tab There should be nothing in the WINS addresses field Check Enable LMHOSTS lookup Select Disable NetBIOS over TCP/IP Keep clicking on OK until you are all the way back out and you can close the Network and Internet connections window. YOU'RE DONE!