Click on the Button.

Start Menu Click on Settings and then Click on Control Panel

Control Panel Double Click on Internet Options

Connections Click on the Connections tab. Click on the Setup button.

Welcome Mark I want to set up my Internet connection manually, or I want to connect through a local area network (LAN). Click on the Next button.

Setting up your Connection Select I connect through a phone line and a modem. Click on the Next button.

Step 1 of 3 Type in the full 10 digit Phone Number in the Phone Number field. Uncheck the Dial using the area code and country code box. Click on the Advanced button.

Connection Tab Mark PPP (Point to Point Protocol). Mark None Click on the Addresses tab.

Addresses Tab Mark Internet Service provider automatically provides one. Mark Always use the following Primary DNS server is 199.181.164.1 Alternate DNS server is 199.181.164.2 Click on the OK button.

	seanet.com	premier1.net	ncia.com
Fully qualified username	username@seanet.com	username@premier1.net	username@seanet.com

Step 2 of 3 Enter your fully qualified username in the User name field. Enter your password in the Password field. Click on the Next button.

Step 3 of 3 Type in Seanet for the Connection name. Click on the Next button.

Set Up Your E-Mail Mark Yes and click on the Next button.

Display Name Type in your name in the Display name field. Click on the Next Button.

E-Mail Address Type in your full Internet E-mail address in the E-mail address field. Click on the Next button.

	@seanet.com	@premier1.net	@ncia.com	@hurricane.net
Incoming Mail Server  (POP port 110)	pop.seanet.com
Outgoing Mail Server  (SMTP port 25 or 587)	mx.seanet.com

E-Mail Servers Reference the mail server table for the correct Incoming and Outgoing Mail Server. Click on the Next button.

Mail Logon Enter your POP login name (usually everything before the @ symbol) in the Account name field. Enter your password in the Password field. Leave Log on using Secure Password unchecked. Click on the Next button.

Completing the Wizard Uncheck the box (unless you wish to connect immediately) Click on the Finish button. YOU'RE DONE!