Click on the Button.

Start Menu Click on Settings and then Click on Control Panel

Control Panel Double Click on Internet Options

Connections Click on the Connections tab. Click once on Seanet to highlight it. Click on the Set Default button if Seanet isn't already your Default Connection. Mark the Option Always dial my default connection. Click on the Settings button

	seanet.com	premier1.net	ncia.com
Fully qualified username	username@seanet.com	username@premier1.net	username@seanet.com

Settings Uncheck all the boxes on this screen. Type your fully qualified username in the User name box. Type your password in the Password box. Leave the Domain field blank. Click on the Advanced button.

Advanced These options are user preference. Click on the OK button when you are done.

Properties - General Tab Click on the Properties button. Type in the full 10 digit Phone Number in the Phone Number field. Uncheck Use dialing rules. Check Show icon in taskbar when connected. Click on the Configure button.

Modem Configuration Maximum speed should be 57600 or less. If you are using a hardware modem leave the check boxes marked under Hardware features. If you are using a software modem (the modem name will usually say "Soft" "Win" or "HSF" in it) then uncheck all the Hardware features. Uncheck Show terminal window and Run script. Check Enable modem speaker Click on the OK button

Options Tab Click on the Options Menu. These options are user preference.

Security Tab Mark Typical (recommended settings) Select Allow unsecured password Uncheck Show terminal window and Run script.

Networking Tab Select PPP. Make sure Internet Protocol (TCP/IP) and Client for Microsoft Networks is checked. Click on the Settings button.

PPP Settings Make sure all boxes are checked. Click on the OK button.

TCP/IP Properties Click once on Internet Protocol (TCP/IP) to highlight it then click on the Properties button. Mark Obtain an IP address automatically. Mark Use the following DNS server addresses. Preferred DNS server is 199.181.164.1 Alternate DNS Server is 199.181.164.2 Click on the Advanced button.

TCP/IP Advanced - General Tab Check all boxes on this screen.

DNS Tab You can mark Search these DNS domains (in order) if you like and enter seanet.com.

WINS Tab WINS addresses should be blank. Enable LMHOSTS lookup should be checked.

Options Tab Highlight IP security and click on the Properties button.

IP Security Mark Do not use IPSEC. Click on the OK button and continue clicking on the OK buttons until you are all the way back to the Control Panel. YOU'RE DONE!